PCFK reversible impact hammer crusher 1408
This machine is suitable for crushing medium-hard and brittle materials, such as coking coal, coal for power plants (with gangue content not exceeding 30% and compressive strength not exceeding 120 MPa), gypsum, etc. The maximum feeding particle size of materials shall not be larger than 80mm, the surface moisture shall not be more than 14%, and the discharge particle size shall be ≤ 10mm.
This machine crushes materials mainly by means of impact. When materials enter the crusher,
they are immediately crushed by the violent impact of the high-speed rotating hammerheads.
The crushed materials rush at high speed towards the impact plate for further crushing, and at
the same time, the materials collide with each other. They are repeatedly crushed like this in the
crushing zone and then discharged from the discharge port.
| Parameter | Specification | PCFK1408 |
|---|---|---|
| 1 | Rotor Diameter | φ1400 mm |
| 2 | Rotor Length | 800 mm |
| 3 | Crushing Material | Limestone |
| 4 | Maximum Feeding Particle Size | ≤80 mm |
| 5 | Discharge Particle Size | ≤10 mm |
| 6 | Capacity | 30-40 t/h |
| 7 | Rotor Speed | 990 rpm |
| 8 | Motor | Model: YE4-315L2-6 IP55 Class F Insulation |
| Power: 132KW | ||
| Speed: 990 rpm | ||
| Voltage: 380V | ||
| 9 | Overall Dimensions of Equipment (Length×Width×Height) | 3756×4267×2100 mm |
This machine is mainly composed of components such as the machine body, rotor, and impact plate. The motor drives the rotor through a hydraulic coupling, which in turn drives the hammerheads to rotate. Materials are crushed by the striking action of the hammerheads and the impact of the impact plate.
